Carbon fiber nylon filament spool with rigid engineering 3D printed parts
$29.99Sold out
Notify me

About this item

Practical performance details for reliable everyday FDM printing.

High precision1.75mm +/-0.02mm diameter tolerance for consistent extrusion.
Smooth feedingNeatly wound filament helps reduce tangles and interrupted prints.
Sealed packagingVacuum sealed with desiccant to help control moisture.
Wide compatibilityDesigned for most standard 1.75mm FDM printers.
US-focused fulfillmentClear availability and shipping status before checkout.

Product details

Specifications, starting settings and product description.

Engineering Filament for Rigid Functional Parts

EPELAY carbon fiber nylon filament is intended for demanding brackets, fixtures and engineering prototypes that benefit from high stiffness and a professional matte surface.

  • Material: Carbon-fiber-reinforced nylon
  • Diameter: 1.75mm
  • Net weight: 1kg
  • Starting nozzle range: 260-290 C
  • Best for: Structural brackets, fixtures and engineering prototypes

Printer Requirements

Dry the filament thoroughly before printing and use a wear-resistant nozzle. Confirm that the hot end, build surface and enclosure are rated for the required temperatures.

Validate the Part

Reinforcement changes stiffness and printer requirements, but it does not improve every failure mode. Test layer orientation, fastener areas and real loading before production use.

MaterialEngineering Filament
Diameter1.75mm +/-0.02mm
Net weight1kg per spool
Nozzle temperature205-225 °C
Bed temperature50-60 °C
Drying guide45-50 °C / 4-6 h
CompatibilityMost 1.75mm FDM 3D printers

About EPELAY

Filament developed for makers, print farms, schools and studios.

Built by makers, for makers

EPELAY focuses on stable extrusion, practical print guidance and responsive product support.

Contact support

Frequently asked questions

Will this work with my 3D printer?

It is designed for most FDM printers that accept 1.75mm filament. Confirm nozzle and bed requirements before printing.

How should I store the filament?

Keep the spool sealed with desiccant in a cool, dry place. Dry it if you notice popping, stringing or inconsistent extrusion.

What settings should I start with?

Start with the temperature ranges in the specifications, then tune in small steps for your printer, nozzle and print speed.