About this item
Practical performance details for reliable everyday FDM printing.
Product details
Specifications, starting settings and product description.
Engineering Filament for Rigid Functional Parts
EPELAY carbon fiber nylon filament is intended for demanding brackets, fixtures and engineering prototypes that benefit from high stiffness and a professional matte surface.
- Material: Carbon-fiber-reinforced nylon
- Diameter: 1.75mm
- Net weight: 1kg
- Starting nozzle range: 260-290 C
- Best for: Structural brackets, fixtures and engineering prototypes
Printer Requirements
Dry the filament thoroughly before printing and use a wear-resistant nozzle. Confirm that the hot end, build surface and enclosure are rated for the required temperatures.
Validate the Part
Reinforcement changes stiffness and printer requirements, but it does not improve every failure mode. Test layer orientation, fastener areas and real loading before production use.
About EPELAY
Filament developed for makers, print farms, schools and studios.
Built by makers, for makers
EPELAY focuses on stable extrusion, practical print guidance and responsive product support.
Contact support
Frequently asked questions
Will this work with my 3D printer?
Check the material and printer requirements shown above. Advanced materials may require an enclosure, higher temperatures or specialized hardware.
How should I store the filament?
Keep the spool sealed with desiccant in a cool, dry place. Dry it if you notice popping, stringing or inconsistent extrusion.
What settings should I start with?
Start with the temperature ranges in the specifications, then tune in small steps for your printer, nozzle and print speed.